===== DZOFILM Arles 100mm T1.4 ===== 
{{ :lens:1717157437_1829464.jpg?300|}}
==== Summary ====
The Arles Prime lens series draws its name from the picturesque town of Arles in southern France, a cherished source of inspiration for the artist Vincent van Gogh. Renowned for its abundant sunlight and vibrant colors throughout the seasons, Arles catalyzed van Gogh's departure from conventional artistic styles.\\
DZOFILM's Arles Prime series, with its T1.4 fast apertures, captures the dynamic interplay of light and shadow, igniting fresh possibilities for artistic expression and cinematic creativity.
==== Tech Specs ====
| Manufacturer    |DZOFILM|
| Series          |Arles|
| Model           |-|
| Focal Length    |100mm|
| Max Aperture    |T1.4|
| Min Aperture    |T22|
| Format          |Vista Vision|
| Image Circle    |⌀46.5mm|
| Minimum Focus   |2ft 11in|
| Focus Rotation  |270°|
| Iris Blades     |16|
| Optical Design  |13/8|
| Squeeze         |-|
| Front Diameter  |95mm|
| Filter Thread   |M86|
| Focus/Zoom Rod  |-|
| Native Mount    |PL, EF|
| Data Protocol   |-|
| Length          |4.24in (PL), 5.08in (EF)|
| Weight          |1830g|
| Body Telescope  |-|
| Body Material   |-|
| Focus Drive     |-|
| Iris Drive      |-|
| Zoom Drive      |-|
==== History ====
Country of Origin: - \\
Release Date: - \\
Launch Price: - \\
Design Revisions:\\
==== Service ====
<nodisp 8>
Service Manual: [[staff:servicedb:arles|Disassembly/Re-assembly]] \\
\\
Full CLA: **#hrs.**\\
<wrap note>Enter relevant notes here</wrap>\\
Focus Scale Swap: **1 hr.**\\
<wrap note> All Arles Primes include a dual-scale. Remove front housing to swap focus between metric and imperial</wrap>\\
Focus end play: **TBD, 2-3 hrs**\\
<wrap note>cam followers located near the front element may have damage or flat spots</wrap>\\
Focus lost motion: **TBD, 2-3 hrs.**\\
<wrap note>cam followers located towards the rear of the lens control the focus movement. If damaged or have flat spots, the focus will have lost motion. </wrap>\\
Replace FE: **2 hrs**\\
<wrap note>front element is epoxied in. </wrap>\\
Replace RE: **2 hrs.**\\
<wrap note>RE is located inside a tube of stacked elements. Requires removing 3 elements (two are doublets) from tube to access rear element. proceed with caution.</wrap>\\
Replace FE: **1-2 hrs.**\\
<wrap note>**__The front element (at least on the 100mm) is epoxied into its housing in addition to a lock ring!__**</wrap>\\
</nodisp>
==== Notes ====
==== Media ====