=====Cooke Anamorphic/i 300mm T3.5 ===== 
{{ :lens:1501777250_1345533.jpg?300|}}
==== Summary ====
Ten high-speed focal lengths from 25mm to 300mm, all color matched for different needs, including a macro focus 85mm lens, each featuring the coveted Cooke Look.
==== Tech Specs ====
| Manufacturer    |Cooke|
| Series          |Anamorphic/i|
| Model           |-|
| Focal Length    |300mm|
| Max Aperture    |T3.5|
| Min Aperture    |T22|
| Format          |Super 35|
| Image Circle    |33.54mm|
| Minimum Focus   |120 in.|
| Focus Rotation  |300|
| Iris Blades     |11|
| Optical Design  |-|
| Squeeze         |2x|
| Front Diameter  |136mm|
| Filter Thread   |131mm|
| Focus/Zoom Rod  |none|
| Native Mount    |PL, LPL|
| Data Protocol   |Cooke/i|
| Length          |15 in.|
| Weight          |9390 g|
| Body Telescope  |none|
| Body Material   |Aluminum|
| Focus Drive     |Manual|
| Iris Drive      |Manual|
| Zoom Drive      |n/a|
==== History ====
Country of Origin: UK \\
Release Date:  \\
Launch Price:  \\
Design Revisions:\\

==== Service ====
<nodisp tech>
{{ :tech:manuals:cooke_optics_anamorphic_lens_service.pdf |Cooke Optics Anamorphic Lens Service [PDF]}}\\
<wrap note>Contributed by Anonymous.</wrap>\\
</nodisp>
\\
<nodisp 8>
Service Manual: [[staff:servicedb:s6iana|Disassembly/Re-assembly]] \\
\\
C+L (mechanics and front optics only): **5-7 hrs.**\\
<wrap note>does not include correcting damaged components, electronics or anamorphic section. Addt time to correct image twist or imperfections.</wrap>\\
optics only: **2-6 hrs.**\\
<wrap note>does not include anamorphic optics.</wrap>\\	
Clean optics at iris: **5-7 hrs.**\\
<wrap note>must remove exterior housing and focus cam to access 8 flathead screws holding rear group. Split at 8 screws to clean at iris. </wrap>\\		
Centering: **4 hrs.**\\
<wrap note>horizontal set screws in rear group under mount to adjust.</wrap>\\			
replace cam follower assembly: **5-7 hrs. + part**\\
<wrap note>QUOTE ENTIRE ASSEMBLY, NOT PARTIAL DUE TO FIT ISSUES	</wrap>\\			
correct twist: **7-9 hrs.**
<wrap note>disassemble to access optical core, remove 3bond on core screws through window, adjust set screws (do not remove screws because set in at angle)</wrap>\\
remove front ring: front ring unscrews towards the rear of the lens. reverse thread. 25mm is especially difficult to remove. use heat and extra sticky mat/neoprene, and lots of force to unscrew.\\
\\	
Electronic issues: **TBD**\\
<wrap note>DO NOT TEST ON RED CAMERAS!</wrap>\\		
</nodisp>

==== Notes ====
==== Media ====
{{ :lens:cooke_anamorphic-i-s35_specification_030623.pdf |}}